Steel Structure Workshop Construction Safety Is The First Consideration

Steel structure workshop construction safety is the first consideration, Xinguangzheng steel structure will share the experience about safety.

1. Basic quality control.

Although the steel structure factory building uses a large amount of steel as the main frame of the construction, the reinforced concrete structure is still inseparable in some basic engineering construction links. In addition, the reinforced concrete construction technology used in the construction of the steel structure workshop foundation project is exactly the same as the traditional technology. For this, we must pay attention to the possible deviation of the anchor bolt.

After the foundation construction is completed, the embedded level of many anchor bolts will have a certain deviation. With the development of construction technology in recent years, the most representative construction in the world is the introduction of information management technology.

2. Main body quality control.

During the construction of the main body, the design drawings and technical standards shall be strictly followed, and the construction shall be of high standards. For example, the error between the anchor bolts of each column of the anchor bolts should be controlled within 2 mm, and the other errors should be controlled within 4 mm, and the construction should be checked and accepted in strict accordance with the control standards.

The main concern: the center displacement deviation of the foundation, the position deviation of the embedded bolts, the settlement observation point and the completeness of the relevant technical data are reviewed. This process should involve the participation of various stakeholders in the project. For problems found in the inspection, timely communication should be conducted, and agreed handling opinions should be unified and fed back to the project supervisor, and the construction of the next process can be admitted after the proper treatment is confirmed.

The most critical and most prone to problems in the steel structure workshop is the installation quality and welding quality of the steel structure. When installing the column, make sure that the column is completely vertical. At the same time, when welding various parts of the steel structure, it is necessary to ensure the high quality of the welding. If unqualified welds are found, or where we think the welding strength needs to be strengthened, we must carry out reinforcement and repair in time, and conduct multiple inspections and confirmations as key quality monitoring points in the subsequent construction. In addition, attention should also be paid to the record, transfer and preservation of all technical data during the construction of the entire main project should be clear, correct and traceable.

All in all, in recent years, with its unique advantages, steel structure construction has been favored by more and more engineering construction personnel and has been widely used in the construction of industrial plants. Safety is the first priority of the project. To ensure the safety of the project and achieve the established project construction goals, it is inseparable from the strict control of the construction quality.

Based on the discussion in this article, during the construction of the steel structure industrial plant, the supervision and control of the construction and installation quality should be strengthened, and relevant pre-planning, in-process leaks and deficiencies should be checked and strict acceptance afterwards should be done well. Relevant management personnel are required to formulate practical and effective quality management measures, from the high-standard procurement of raw materials to the reasonable stacking of engineering materials, from the precise control of errors in the construction process, to the strict acceptance of the completion of the construction. Key points of quality control. Through the above-mentioned multi-party efforts, it is ensured that the construction quality deviation of the steel structure factory building is effectively controlled, and a solid and reliable guarantee is provided for the subsequent safe and stable industrial production.